Last Updated at July 21, 2011 08:29PM EDT.
[The Photo Gallery]
Hose Hook

 

 

 

..<DIR>Previous Directory 
DSC01861.jpg80,163
640 x 480		While cleaning up from a previous project, I had a few scraps of spouting left. A down spout and an elbow.

I went to pick up the garden hose that was laying on the ground and the idea hit me.

I trimmed off the sides of the down spout section and took off it's elbow piece. I then attached a larger elbow to it with some leftover screws.

I then screwed it to the house with longer screws and washers. 		[DSC01861.jpg]
DSC01862.jpg88,747
640 x 480		Here's a picture of the hose hook with the garden hose hanging on it.

Not to bad of an idea if I do say so myself.

Now. Let's just see if it stays there and the screws don't rip out of the wall. lol 		[DSC01862.jpg]
DSC01864.jpg56,714
640 x 480		I added a little end cap using some leftover pieces I cut off of the down spout. Makes it look a little nicer.

A friend pointed out that without the cap, the hole could be used as a holder for the spray nozzle. 		[DSC01864.jpg]



Total of 3 files in 225,624 bytes.